How To Clean Up Fire Extinguisher Powder? Read

Did you recently use a handy fire extinguisher to put out a small fire in your vicinity? But that must have left some residue, right? You must clean up that messy looking fire extinguisher residue too. 

The suggested cleaning methods are based upon on the kind of extinguisher you used. Make use of the knowledge we provide here on how to clean up fire extinguisher powder.


Tips on Cleaning Up Fire Extinguisher Powder

    • Dry chemical fire extinguisher residue must be eliminated as soon as possible, especially if it has come into contact with metal surfaces. These substances leave a corrosive powder behind. Some cleaning advice is to sweep or hoover out stray particles.
    • Use isopropyl alcohol diluted with warm water to spray any stuck-on residue. After a while, clean the particular area with a wet cloth.
    •  Use a solution of 98 percent hot water and 2 percent vinegar to neutralize sodium bicarbonate and potassium bicarbonate residue. After some time, use a wet cloth to clean the area.
    •  Apply a paste made of baking soda and hot water to remove any remaining monoammonium phosphate. After some time, use a wet cloth to clean the area.
    • Rinse thoroughly after giving the impacted area one last wash with soap and water. You can make use of fans to quicken the drying process.
  • Residue on dishes, cookware, or clothing, could be washed as you usually do. 

Class K Wet Chemical Fire Extinguisher: Residue Cleaning Tips

Commercial kitchens are advised to use Class K wet chemical extinguishers due to the corrosive nature of dry chemicals. A potassium acetate-based, low-pH Class K extinguisher releases a fine mist to cool cooking surfaces and put out fires caused by cooking oil and grease.

  • You must clean up the leftovers before you resume cooking.
  • Put on rubber gloves and turn off the power to all the kitchen appliances to prepare the space.
  • Rinse all surfaces that came into contact with wet chemicals, remove any frothy residue with a sponge or cloth immersed in hot, soapy water, and let everything air dry thoroughly before turning the power back on. 

Halotron Fire Extinguisher: Residue Cleaning Tips

Halon is sometimes used as the main firefighting fluid in older fire extinguishers. You might still own a Halotron fire extinguisher that you just used to put out a fire even though they are no longer manufactured. Halon does not leave any visible trace behind, but cleaning the area where it was used is still necessary to get rid of the fire’s smokey smell and neutralize the surface.

  • To the damaged region, apply diluted degreaser. 
  • Apply a neutral cleaner to get rid of any leftover residue; use a sponge for tiny areas or a spray bottle for bigger ones; wipe away any cleaning agents; and wait for the surface to dry. 

Sum up

Now you know how to clean the residue, it’s going to be easy for you. But we would also insist you to invest in recent innovations that have resulted in extinguishers that are non-conductive and non-ozone depleting, making them ideal for putting out fires near electronic devices or gadgets that could be spoiled by water or corrosive dry chemicals. They do not leave any residue behind and hence do not need any cleanup task. Why not plan to buy such one’s next time?


Also Read: Effective Ways to Remove Manic Panic Dye from Skin: 6 DIY Methods and Professional Tips

Leave a Reply

Your email address will not be published. Required fields are marked *